Product Description
Aquatic Access manufactures a variety of AG (Above-Ground) lifts, each of which is configured to fit the pool or spa where it is to be used. The length of the liftâs cylinder governs the distance the seat travels vertically to clear the wall of an above-ground pool/spa. The AG-48 has a 31â vertical seat travel; the AG-60 has a 42â vertical seat travel; and the AG-72 has a 51â vertical seat travel and is designed for high-wall therapy tubs as shown.
These lifts mount on a 16â plate with a supportive tripod ( for freestanding applications) which is bolted to the deck, or a smaller plate coupled with a top wall bracket attached to the top flange of the pool. The AG lifts can also be designed as WP models to mount on a customer-supplied 6â x 6â wood post which is usually set in concrete a minimum of 30â deep. Seats on all of the AG lifts can be forward-facing (cylinder behind) or side-facing (cylinder on left or right of seat). Forward-facing seats allow userâs legs and feet to clear benches in pools/spas.
⢠Can accommodate various wall heights
⢠Usually assisted operation -Manual 360° seat turn
⢠Mounts on customer supplied Wood Post
⢠Powered by Water Pressure
⢠Lifts up to 300 LBS. at 55-65 PSI
⢠Custom heavy-duty version available
⢠Standard Vertical Seat Travel - 31"
⢠Various mountings dependent on application
The Pool Lift Model AG-48WP is a lift designed for access to above-ground spas and hot tubs. This lift mounts on a customer-supplied 6" x 6" wood post set 30" into the ground, secured with concrete, and cut off even with the top of the pool wall. The standard seat faces away from the spa, and has two rigid arms.
Optional side seats and several styles of manual turn handles allow some people to use this lift unassisted by manually rotating themselves while on the seat. Other applications for this unit include freestanding nursing home tubs, therapy pools, and swim-spas. It is essential to provide dimensional information about your pool or spa. Please request that one is emailed to you!
