The Splash! Lift series meets the Americans with Disabilities Act Access Guidelines (ADAAG 2010). In addition to the standard configuration, the Splash! lift is also available in Hi/Lo, Spa, Extended Reach, Splash! 300, Splash! 300 Hi/Lo, and Splash! 300 Spa versions. The Splash! lift installs into your pool deck via anchor, and can be easily removed for winter storage. 359° rotation ensures a safe transfer area.
⢠This removable lifting system is designed for swimming facilities seeking to provide user-friendly access to their swimming pools.
⢠3rd party tested & verified ADA compliant
⢠400 lb/181.5 kg lifting capacity**
⢠Easily removable from stainless steel deck anchor
⢠Powered by the Lift Operator Intelligent Control System
⢠True operational redundancy â lift can be operated from the control box and the handset
⢠359° rotation ensures a safe transfer area
⢠Made from powder-coated stainless steel and aluminum
**Lifting capacity of the Extended Reach model and Splash! 300 has a 300 capacity
⢠To order Splash! 300 models, use the following part numbers: 300-3000 for Splash! 300,
⢠350-3000 for Splash! 300 Hi/Lo, 375-3000 for Splash! 300 Spa
⢠To order a lift with an Activation Key (for LiftOperator), add a K to the end of the part number.
⢠California package includes arm rests, cover and spineboard attachment.
⢠Special order Splash! lifts can be specially ordered to fit into older Splash Lifts with Round Anchors
⢠Splash! Spa â Designed for use with spas up to 48â above the deck.
⢠Splash! Extended Reach â For use with pools with unusual gutter configurations requiring a longer reach.
⢠Splash! ER Hi/Lo â For facilities that have both in-ground pools and above ground spas, requiring a longer reach than the Splash Hi/Lo
⢠Splash! 300 - Features easier installation (compared to the standard Splash!) because it can be installed by core drilling, with no additional footings required on a standard 4â deck
Lift Model Shall be: S.R.Smith, LLC Splash!âSemi-Portable Lift System, Part # 300-0000/EU
⢠It shall be battery powered, comply with Americans With Disabilities Act Access Guidelines (ADAAG), and have a lifting capacity of 400 pounds.
⢠Product shall include battery, charger, battery console cover, waterproof control, stainless steel anchor socket with cover, footrest and seat
⢠Manufacturer to provide technical support and assistance to confirm pool lift satisfies pool geometry or if another Splash!
B. Have a LINAK (approved for medical applications) screw/spline type actuator to provide a safe and stable stop at any point in the lifting cycle.
Capable of:
C. Configured to facilitate ease in user transfer within clear deck space of 36 inches wide by 48 inches deep starting 12 inches from the back endof the seat (Ref. ADAAG).
D. Have a 24-volt gear motor to power side to side rotation to allow for ample clear deck space for transfer on both sides of the lift.
E. Seat:
F. Be structurally capable of providing a stable user transfer and pass a static load test equal to 1.5 times the rated load capacity.
G. Metallic parts (stainless steel and aluminum) to be passivated, pretreated and powder coated using a 5-step process. The process is to be
10 (highest possible rating). (Note: The test is the equivalent of 10 years exposure to this harsh environment.)
H. Have a Manufacturerâs Warranty:
